The DMR Defy35 is the perfect mtb stem for your Trail/All mountain build. It features a low stack height, Top-Close clamp design, 35mm reach and 5mm rise. The Defy35 mountain bike stem has a wide clamping area for bar stability and stubby length to pair well with aggressive modern geometry.

35mm diameter clamp and 31.8mm diameter clamp available.

Tomorrow is better when you build on experience and success from the past to reach new heights. We did just that with a limited-edition release of the Hayes Dominion A4 “Purple Hayes”. The purple colorway is a testament to the early days of mountain biking that saw Hayes bring technology to the world that forever changed our sport. The early editions of Hayes disc brakes were both groundbreaking and disruptive. To celebrate such a fantastic ride, a quarter century of molding the definition of fantastic braking performance for mountain biking, we are proud to introduce a limited run of the highest-performing brake to date, the Dominion A4, in a colorway that recalls perhaps the brand’s most iconic and visually striking model.

•Tool-Free Reach Adjustment
•Flip-Flop Lever Orientation
•King Pin Pad Retention
•Crosshair Caliper Alignment
•Two-Stroke Dual-port bleed system

•310g (100cm hose and mount hardware)
•DOT 5.1 Fluid
•Tool-Free Reach Adjustment
•2-Stroke Dual Port Bleed System
•Sealed Cartridge Bearings Lever Pivot
•180cm Hose Length Only

The SRAM Battery Cover for Eagle AXS Rear Derailleurs protects the battery

Compatibility With The Following AXS Models

SPECS   

Ideal for children and young cyclists. The special Black'n'Roll compound in sizes 12", 16" and 18" will not leave unsightly skid marks on floors.

• Wired Tyre
• SBC Compound, except sizes 12/16/18" Black?n?Roll compound
• K-Guard protection
• LiteSkin sidewalls

The Spike Grip from Spank has been specially designed with the off-road thrill-seekers and MTB enthusiasts in mind for the ultimate grip. Boasting a single lock ring design and smooth thumb zone for additional comfort while its reinforced anatomical bar end design supports and protects your little finger. To top it off, this stunning duo features cutouts to improve impulse shock, vibration absorption and comfort so you can get the most out of every ride.

• Human Factor interlocking column, low profile design offers the comfort and durability benefits of a finned grip without unwanted float
• Anatomically designed, impact-resistant bar end tapers to support and protect the little finger
• Anatomical bar end design supports and protects the little finger
• Cut out in base improves impulse shock damping, vibration absorption, and comfort
• Extra-long body with single lock ring and smooth thumb zone to reduce trigger friction
• Recommended for: All mountain, enduro, trail, freeride, DH, E-Bike

The original MTB saddle guard.
Improved design: thicker, stronger and reprofiled for a better fit.
Prevents 'soggy arse syndrome'.
Fitted as close as possible to back face for optimum muck catching.
Prevents the top of your seat post from getting clogged up.
Discrete but very effective.
Possibly the lightest MTB rear mudguard, at just 30g.
No need for separate fasteners, making it easy to fit and take off.
Compatible with all standard double steel rail saddles, so long as they don't have any daft bits hanging off the rear.
Easy to clean as it's flexible and opens flat. Simply wipe it and you're done.

ROTOR MDR-C 

• Thanks to the additional connecting ring the one-piece rotor, optimized for e-bikes is particularly stiff, vibration resistant and the ideal all-rounder
• whether on city, trail or e-bike
• E-Bike optimized
• Hole pattern: 6 hole
• 6 steel mounting screws included
• Compatible with: complete MT-Family

Diameters: 160mm, 180mm, 203 mm
Weight: 222 g
Includes: 1 Rotor incl. 6 steel mounting screws

A QUICK-CHANGE DIRECT MOUNT CHAINRING SYSTEM

Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler.  

• Cheaper Replacement Cost - Replacement rings are a fraction of the cost of a complete direct mount chainring
• Quick Change - Replace your ring in less than an minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding
• Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain
• 4 Ring Sizes (28, 30, 32, 34T)
• 2 Profiles - both Round and Oval 
• 12 speed ring designed to work with all 10, 11, and both Shimano Hypergilde+ 12 and SRAM Eagle 12 speed chains.
• Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire

Material:  7075-T6 Aluminum

Oval Rings: 

• 12% ovality (32T is equal to a 30T-34T range)
• 115° clocking from crank arm puts the major axis in your power stroke

Compatibility:  All Switch Carriers;  10, 11 and 12 Speed Chains 

Colour: Black

Spank Spoon DC Pedals

These stunning pedals offer a durable alloy platform at the price of a plastic pedal. Specifically designed for MTB use, their large platform size with a concave profile combines smooth pedal rotation with ultimate grip. What's most impressive, is their shot-peen surface combats against impact resistance and fatigue, so you can take on all the challenges of a long ride across the mountains.

FEATURES:

• Platform Material: Alloy
• Axle Material: Cold Forged CrMo Steel
• Bearings: Industrial sealed bearings, IGUS bushings
• Pins: 12 Steel & 8 Alloy pins (per pedal)
• Platform Size: 100x105mm
• Platform Profile: 16mm
• Weight: 395g (approx)

Specs

• Colour: Gold, Blue, Black, Purple, Rust, Gun Metal, Green, Red

​By popular demand, the all new Copperhead 35/OS Stem has finally arrived!  You begged us for a larger 35mm bore counterpart to the beloved award winning Copperhead 31.8mm Stem and we’ve delivered in a big way.  At an insane strength to weight ratio, the Copperhead 35/OS stem is a specimen to behold.  Designed for Trail, All Mountain, and Enduro, this lightweight option also delivers more than enough strength for Slopestyle and just about anything you have to offer.  Available in both a 35mm and 50mm length with a zero degree rise, the all new Copperhead 35/OS not only stands alone visually, it will out perform the toughest competitors with a unique style synonymous with DEITY.

THE DEFINITION OF FUNCTION AND DETAIL

• The new benchmark in grip design
• DIRT MAG Top 100 Product for 2018!
• Featuring DEITY TRC rubber compound for exceptional durability
• Tapered inner sleeve to insure perfect contact with the handlebar
• Single clamp design with forward facing bolts that feature loc-tite
• Lasered black ano 6061 T6 aluminum clamps
• Short and wide rib design for added comfort with no side to side play
• Half waffle recessed design for added control without hot spots
• Chevron v-channel design for your palm swell to give an ergonomic feel
• Seamless transition through the end of grip for comfort
• 132mm length with 32mm outer diameter
• Intended use: All MTN / Enduro / DJ / Slopestyle and DH
• Full color range available in black, stealth, red, green, blue and orange
• 101 grams for the set
• INSTALLATION TIP: To fully and properly install your KNUCKLEDUSTER grip due to the tapered inner sleeve...make certain to whack the end of the grip 3 times with the palm of your hand until the grip fully seats onto the handlebar and finish the install by tightening the hardware to the specs listed on the packaging.
• VITAL MTB REVIEW - 4.5/5