Braving the elements? Then grab our new Rain Shield Re-proofer spray. It creates a cutting edge DWR (Durable Water Repellent) layer on all types of technical clothing.

It is a simple to use ‘spray on’ waterproofing treatment, designed to restore factory levels of performance on all waterproof and breathable fabrics. It uses the latest technology to reduce the surface tension of the fabric and provide the very best waterproofing without impacting the breathability of fabrics. It also helps to protect against mud and ground-in stains. And the best bit? It’s safe for the environment, as it’s water-based and doesn't contain PFCs!

Our state-of-the-art ‘spray on’ formula gives unrivalled protection within 24 hours of treatment. After application, water will bead and roll off, so you’re protected to go and get rad in the harshest of conditions.

• PFC free, water-based formula 
• Not harmful for the environment or to you
• Helps to repel wet mud and grime and protects against ground-in stains
• Will not impact breathability of garments
• Extends life and performance of garments
• Easy to apply, supplied in a spray bottle
• Can be used on any technical or waterproof/water repellent fabric including Goretex®, Polartec®, Pertex®, eVent®, softshell clothing, hardshell clothing and down-filled garments
• Will treat 1-2 garments per bottle!

• HOW TO

  1. Shake bottle well before use to activate the formula.
  2. Spray all over a clean, damp garment from 10-15cm away until garment is fully treated. (We would recommend using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). We recommend spraying in a well-ventilated, dry area.
  3. Remove any excess treatment with a clean cloth.
  4. . Allow treatment to cure. Air dry by hanging up and leave to dry overnight before wearing garment in wet conditions again.
  5. The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer. Best applied to a clean, damp garment for optimum results

   
  

  • FREQUENTLY ASKED QUESTIONS

    How many jackets/garments can I treat per bottle?

    Depending on how much you use the 250ml bottle will treat around 2 garments (XL sized jackets) per bottle. 

    How long will the treatment last after application?

    The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing. 

    All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer.

    Can you use Rain Shield on normal clothes?

    The spray will add a DWR coating to the fabric to provide some water resistance, but you cannot make non-waterproof fabric fully waterproof.

The Muc-Off Premium Bike Shoe Care Kit is packed with everything you need to show your shoes some love. There’s a cutting-edge hydrophobic rain repellent, super-effective shoe cleaner, Foam Fresh, premium brush and microfibre cloth so you can freshen up your MTB, gravel or road shoes – no matter how grimey or muddy they get. It contains all the tools to get your shoes looking factory fresh. No more excuses for not sending it on rainy days!

1x Muc-Off Premium Bike Shoe Cleaner 250ml
1x Muc-Off Premium Footwear Shield 250ml
1x Muc-Off Foam Fresh 250ml
1x Muc-Off Premium Bike Shoe Brush
1x Muc-Off Grey Microfibre Cloth
1x Muc-Off Storage Tote Bag

Muc-Off Premium Bike Shoe Cleaner

• Biodegradable, environmentally friendly, water-based formula
• Powerful cleaning performance
• Doesn’t compromise breathability
• Suitable and safe – specifically designed for bike shoes
• Safe on wide range of fabrics/textiles
• Perfect for preparing your footwear for fresh waterproofing/re-proofer treatments such as Muc-Off Premium Footwear Shield
• Handy sized 250ml spray bottle

Muc-Off Premium Footwear Shield

• Suitable and safe to use – specifically designed for bike shoes
• Advanced polymer technology offers excellent performance without using harmful chemicals
• Water-based formula
• Safe on technical fabrics, suede, nubuck, leather and other fabrics*
• Added conditioning additives for leather, nubuck and suede
• Hydrophobic – offers excellent water repellency
• Improves resistance to dirt and oil
• Maximises breathability
• PFC-free/non-hazardous
• Effective without heat activation
• Handy sized 250ml spray bottle

Foam Fresh

• Ideal for any soft material which comes into contact with the rider
• Instant foaming action
• Gently agitates dirt and grime away from the surface
• Citric Burst fragrance

Muc-Off Premium Bike Shoe Brush

• Synthetic PP bristles
• Effectively removes mud and grime
• Handcrafted wooden handle
• Screen printed Muc-Off logo
• Great for all-around cleaning
• Tough on stubborn stains

Luxury Microfibre Cloth

• Super-soft, high-quality cloth
• Safe to use on all surfaces and textiles
• Deep-pile material traps dirt deep in the pile of the cloth
• Split-fibre technology for increased absorbency
• Machine washable

Breathable, waterproof MTB pants

When you take your adventures all over you need a pair of pants that deliver advanced weather protection to match. The Ranger 2.5L Water Pants keep you dry through a wide range of conditions, are constructed with a fully seam-sealed interior, and feature a lightweight, 2.5-layer waterproof main fabric. With two zippered pockets to store your essentials and a lower leg gusset with adjustable snap closure for easy on/off, they're a must-have for the ride.

• Advanced weather protection for a wide range of conditions
• Lightweight 10K/3K 2.5-layer, waterproof main body fabric
• DWR finish sheds moisture, dirt, and debris
• Two zippered hand pockets for storing essentials
• Lower leg gusset with adjustable snap closure for easy removal
• Fully seam-sealed construction
• Shell material made with recycled materials
• 10K/3K waterproof/breathability rating
• DWR finish sheds moisture, dirt, and debris
• Fully seam-sealed construction

Materials

• 100% polyester

Care

• Machine wash gentle cold
• Wash dark color separately
• Use gentle detergent
• Line dry in shade
• Do not use fabric softener
• Do not bleach
• Do not iron
• Do not dry clean

Tough and durable wet weather mountain bike jacket

Designed to keep you dry in the most demanding conditions, the Defend 3L Water Jacket features advanced weather protection with fully-taped seams and waterproof zippers to ensure no water gets in as you shred. With an added DWR coating, the jacket is also adept at repelling water, dirt, and debris, while the hook and loop adjustments as the jacket cuffs allow you to create additional weather protection.

• Advanced weather protection features fully-taped seams and waterproof zippers
• Strategically placed Cordura® in high-wear zones provides extra durability
• Two zippered hand pockets to keep valuables secure
• Hook and loop adjustment at arm cuffs for additional weather protection
• DWR treatment repels water, dirt, and debris
• The hood is big enough to fit over most helmets
• Underarm vents with waterproof zippers
• Length (HPS): 28" size large
• Fully-taped seams and waterproof zippers
• Cordura® in high-wear zones provides extra durability
• DWR treatment repels water, dirt, and debris
• Underarm vents with waterproof zippers

Materials

• 91% polyester, 6% elastane, 3% polyamide nylon
• Back: 100% polyester

Care

• Machine wash gentle cold
• Wash dark color separately
• Line dry in shade
• Do not use fabric softener
• Do not bleach
• Do not iron
• Do not dry clean

 Our answer to the call to create a ruggedly dependable transmission for your enduro needs, the X0 T-Type AXS Transmission groupset is our most robust high-performance transmission. Our all-new Transmissions take a holistic approach to a bicycles shifting, an entire system synchronized, providing you with a superior ride experience. Shifting under load is made possible on the X0 cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hard

With Eagle Transmission being the first of its kind, fully integrated and interdependent system, the X0 Eagle Transmission (T-Type) Flattop Chain is so much more than just a chain. Its unique flat top design makes it the strongest change chain we have ever made.

Sram X0 T-Type Eagle Transmission Flattop Chain

The single crown sibling of our DH38 platform has now been updated to create a more compact, shorter and more lightweight design; optimized for long-travel bikes with up to 180 mm of travel. Designed for both gravity bikes and eMTB with multiple crown offset choices available. The new m.2 version has been re-engineered with a stiff chassis that will keep your line choice on even the most demanding trails. The capable air spring and TTX18 damper will keep your tires planted with the best possible ground contact, swallowing roots and rocks; making your ride more comfortable and controlled.

The RXF38 m.2 boasts a huge range of adjustment; 15 clicks of low-speed compression and low-speed rebound damping and 3 clicks of high-speed compression adjustment, in addition to a climb mode setting. The re-tuned twin-piston, three-chamber air spring system allows for comprehensive air spring tuning from the initial movement right through to the bottom out.

Technical Specifications:

• TTX18 damping system
• Independent cartridge air spring and damper systems
• Air spring adjustable to 160/170/180mm of travel
• Designed for 200mm rotor size, 220 max
• Easy to tune three-chamber air spring system
• 38 mm stanchion diameter
• 44 mm crown offsets
• Floating axle design to minimize tire sizes up to 29 x2.6
• Approved for eMTB use and available with eMTB compatible crowns
• Compatible with maximum tire sizes up to 29x2.6
• Weight: from 2320 grams
• Axle to crown measurement: 583 mm @170 mm stroke
• Rebuildable
• 2 year warranty

Adjustment:

• 3-click high speed compression damping
• 15-click low speed compression damping
• 15-click rebound damping

Purchased parts package:

• RXF38 m.2 including crowns
• Owners manual

THE CHRONO, BEFORE ALL ELSE, IS A DYNAMIC BIKE

Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.

Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.

Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack.

With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.

Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.

This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.

Features

• Available in 12x Chris King colours.
• Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork.
• With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn't widen the size of the - hole already there.
• Fork made from 316 stainless steel.
• Body made from anodised 6061 aluminium.
• Knurled body and ribbed lid / handle for extra grip.
• Weather sealing o-rings make the tool waterproof when assembled.
• Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs.

Everyone knows that a straight line is the fastest line! That's why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.

It's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike.

Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colours.

Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.

Key features

• Available in 12x Chris King colours.
• Unique Patent Pending compact straightline design for maximum airflow.
• Simply push down to inflate.
• Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves.
• Each kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeve.

Lightweight and packable, water-repellent jacket

The Fox Head Camo Windbreaker helps you blend in with your environment and stay dry while you're at it. With its simple lines and quality construction, this convenient garment is a no-fuss, highly packable jacket. Featuring a DWR coating to keep moisture at bay, a cord to cinch that hood tight, and zippered side pockets to stash your stuff, this go-to windbreaker will effortlessly repel light rain and wind as you go about your day.

Specifications:

• Polylite housing with fibre reinforcement
• Dual density EPS and EPP mould
• MIPS impact safety system
• Polyacrylite injected chin guard with EXOskeleton
• 11 high-flow inlet vents, 3 on the chin guard, and 14 outlet vents
• X-Static moisture wicking and quick-drying inner lining
• Fidlock magnetic buckle
• Weight: 690 gr (size M/L)

•400 Lumen

•Light Source: XPG Super bright white LED

•Functions: Steady (100% & 35%) - Flash - Off

•Battery: 1200mAh Lithium Ion

•Run Time: 3 - 5 hours

•Remote control switch

•Multi-function electric horn

•USB rechargeable

•Waterproof: IPX4

A lightweight jacket with DWR for light showers

The Survivalist 2.0 Anorak helps you survive drizzly days, keeping warm, dry, and comfortable. With its DWR coating, light rain and debris will slide right off, while the hood and pockets will bring that extra layer of rain protection. This anorak is lightweight and has plenty of pockets to store loose and essential items. If conditions look cloudy with a chance of rain, or the breeze is whipping up, this jacket is more than capable of ensuring you keep on trucking through it all.