Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.

Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.

Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack.

With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.

Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.

This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.

Features

• Available in 12x Chris King colours.
• Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork.
• With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn't widen the size of the - hole already there.
• Fork made from 316 stainless steel.
• Body made from anodised 6061 aluminium.
• Knurled body and ribbed lid / handle for extra grip.
• Weather sealing o-rings make the tool waterproof when assembled.
• Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs.

Everyone knows that a straight line is the fastest line! That's why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.

It's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike.

Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colours.

Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.

Key features

• Available in 12x Chris King colours.
• Unique Patent Pending compact straightline design for maximum airflow.
• Simply push down to inflate.
• Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves.
• Each kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeve.

Specifications:

• Polylite housing with fibre reinforcement
• Dual density EPS and EPP mould
• MIPS impact safety system
• Polyacrylite injected chin guard with EXOskeleton
• 11 high-flow inlet vents, 3 on the chin guard, and 14 outlet vents
• X-Static moisture wicking and quick-drying inner lining
• Fidlock magnetic buckle
• Weight: 690 gr (size M/L)

•400 Lumen

•Light Source: XPG Super bright white LED

•Functions: Steady (100% & 35%) - Flash - Off

•Battery: 1200mAh Lithium Ion

•Run Time: 3 - 5 hours

•Remote control switch

•Multi-function electric horn

•USB rechargeable

•Waterproof: IPX4

Designed to get that suspension running smoother than butter is our new Silky Suspension Serum. This suspension specific, silicone infused wonder formula reduces the stiction between wiper seals and stanchions, keeping everything lubricated to help with small bump sensitivity and trail buzz. It even helps to repel muc (k) and grime, keeping surfaces cleaner and reducing the risk of contaminants getting into the wiper seals and ruining both your fork oil, and your ride!

The anodised coatings on suspension stanchions can be porous. This means there are lots of tiny crevices that dirt and grime can build up in, eventually creating a grinding, high wearing paste if not maintained properly. The upper tubes can’t be changed independently either as they’re pressed and bonded to the crown of the fork. The silicone infused formula can help fill these tiny crevices creating a friction reducing coating that protects the stanchion and helps repel contaminants.

We've specifically produced this for the race enthusiast who wishes to get the best out of their suspension performance. It's simple & direct application ensures a targeted application. Formulated using high levels of premium silicon oil to create a ultra low friction reducing surface, t his formula has a higher % silicone content over our standard silicone shine spray for maximum performance. Silky Suspension Serum is the first launch of the new Technical Series range, a series of high end performance lines to support riders demanding & requiring elite performance & results.

• Formulated using high levels of premium silicon oil to create an ultra-lowfriction
• Reduces stiction keeping your suspension running silky smooth.
• Lubricates seals.
• Boosts suspension performance.
• Works on shocks, stanchions and dropper posts.
• Helps prolong and protect the life of your parts.
• Helps repel dirt and cuts down on future cleaning and maintenance.
• Leaves no dust, residue or stickiness.
• Smells awesome!
• Handy 100ml spray bottle
• Safe on most suspension components and coatings including Kashima

Peaty's HoldFast Trail Tool Wrap is the ultimate flexible storage solution, designed to flexibly carry your trail essentials on any bike while keeping them clean and giving fast access in trailside emergencies.

Features

• No Rattle, No Slip!
• Flexibly carry your trail essentials on any bike.
• Waterproof material with durable welded seams keeps your tools clean.
• Waterproof zippered stash pocket keeps essentials dry.
• Modular design works with or without an innertube.
• Unique strap attachment secures wrap firmly to your bike.
• Reflective print for extra visibility.
• Fast access to your tools in trailside emergencies.
• Available in Nightrider Black, Slate Grey and Moss Green.

Moon Meteor Rechargable Front Light

AW19 MOON METEOR FRONT

Comfortable fit, classic flannel shirt

Flannels never go out of style, and the Traildust Flannel Shirt is a comfy addition to your flannel arsenal. Soft, durable, and warm, this flannel is the perfect weight to layer over a tee or under your favorite jacket or hoodie.

• Brushed cotton fabric is soft, durable, and warm
• Perfect weight for layering under fleece or outerwear

Low-profile roost deflector with D3O® armor

The Raceframe Impact Soft Back Guard is Fox Racing's top-level chest guard which can be worn over or under the jersey. Its low-profile and articulated design and features fit snugly to the body, ensuring you have full range of motion while riding.

The rugged D3O® armor is built to absorb impacts without restricting motion. With extensive laser perforated venting, you'll stay cool with increased breathability and airflow. Versatile and designed for the Rider Attack Position™ (RAP), the Raceframe Impact Soft Back Guard is built to perform so you can too, and adjusts to fit all body types.

• Articulated design for a exceptional fit
• D3O® impact insert
• Highly vented for maximum comfort
• Low profile allows for versatile use under or over the jersey