CushCore is an engineered foam insert that mounts inside a mountain bike tyre. It divides the inner volume of the tyre in half, with air underneath the tread and the CushCore insert next to the rim.

The purpose of Cushcore is to improve the ride quality of your bike. It is not just for flat protection. CushCore absorbs shock, stops deflection off obstacles, reduces vibration, and stabilizes the tyre against roll and squirm. Think of it as suspension for your tyres designed to give you a faster, smoother ride.

Although single liners are available, CushCore is designed to be used as a set.

This product contains:

1 CushCore Insert
1 CushCore Tubeless Air Valve
Installation Instructions

COMPATIBILITY

CushCore is compatible with your current tubeless tyres and rims
If your wheels are not tubeless ready, rim sealing tape will be required

We recommend the use of tubeless tyre sealant with CushCore

Installation with certain tyre & wheel combinations may require two people - one to work the tyre levers, and another to hold the tyre bead in the drop center of the rim.

Wire bead downhill tyres are most likely to need extra help.

What Cushcore do i need for my bike?

Gravel - An ultra-lightweight insert that reduces fatigue, improves cornering, and helps prevent flats

Fits tyre widths 33mm-46mm

Fits rims with internal width 19mm-26mm

700c - 120g

Pro - The original full-performance version. CushCore PRO allows you to push the limits of your tyres and suspension to new levels. The best choice for the majority of wheels, terrain, and riders.

Fits tyre widths 2.1 - 2.6"
Fits rims with internal width 22 - 35mm
26 - 245g
27.5 - 250g
29 - 260g

XC - Light weight version designed for cross-country racing, light trail riding, and/or less aggressive riders.
Fits tyre widths 1.8 - 2.4"
Fits rims with internal width 22 - 32mm
27.5 - 140g
29 - 150g

Plus - All the performance benefits of the PRO, but optimised for plus sized tyres and wider rims.
Fits tyre widths 2.6 - 3.0"
Fits rims with internal width 32 - 45mm
27.5 - 290g
29 - 330g

CushCore inserts are extremely durable.  Our foam is engineered to withstand repeated pounding and flexing without degradation.  It does not absorb liquid and is not affected by tyre sealant.  Service life will depend on your riding frequency, terrain, etc. 

LESS IS MORE WITH THIS 1-LITER BIKE-SPECIFIC HIP PACK.

We took our popular Hot Laps 2L Waist Bag and distilled it down to a one-liter version with an ultra-intentional design that features a single deployable water bottle pocket, external straps for pads, one cargo pocket with organization for tools, a tube, and snacks. Its compact size will stay put through the jankiest tech sections, but its deliberate functionality ensures you're repair-prepared. For those with a dialed kit, this is the ideal piece for everyday rides.

A WOMEN'S SPECIFIC LIGHTWEIGHT 8-LITER BIKE HYDRATION BACKPACK.

A sturdy staple, the Women's Session 8L is a lightweight, compact hydration pack with dedicated storage for trail essentials. An updated recycled poly outer is rugged and sustainable, and the women's specific fit of this lightweight pack ensures minimal shifting and evenly distributed weight, while the breathable air flow back panel and shoulder straps keep you cool on the trail by minimizing hot spots. The Women's Session stores two liters of vertical hydration, features a dedicated fleece-lined pocket for sunglasses, internal organizer pockets, and an integrated rescue whistle on the sternum strap.

• Presta Valve
• CNC Machined from 6061 T6 aluminum
• Knurled body for added grip
• Sold as a pair
• Upgrade your plastic caps with some style!
• Weight: So light they will not register on our scale

34mm OD  ///  Deep Dish Diamond  ///  TRC+ rubber blend

• All-new TRC+ Kevlar infused rubber compound is extremely tacky, yet durable
• Deep Dish Diamond pattern provides unrivalled cushioning without compromising responsiveness and control
• Tapered inner sleeve to ensure a snug interface with the handlebar
• Single clamp design with forward facing bolts that are pre-coated with Loctite
• Lasered black anodized 6061 T6 aluminium clamps
• Larger 34mm outside diameter for supreme comfort, 133mm length
• Full colour range available in black, stealth, red, orange, green, blue, turquoise, purple, pink, and gum options.

The DMR Blade is our direct mount chainring. It replaces your previous spider and chainring setup.
The DMR Blade mtb chainring has a Wide/Narrow tooth design. Combined with a clutch mech, no chain device is needed.
This DMR chainring has stiff 4mm wide 7075-T6 Aluminium which maintains direct power transfer.

The DMR DeathGrip is the second collaboration between DMR and Brendog.
We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound.

• NEW colours added to the DMR Brendog DeathGrip range for 2020.

• Tapered Core | No need for outer lock ring

• Waffle and Knurl for grip

• Mushroom for comfort

• Available in Thin (29.8) or Thick (f31.3)

• Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A.

• 100g per pair

Replacement collars for DMR Deathgrips. Each packet contains two anodised Aluminium Collars to customise your Deathgrips - the ultimate all mountain bike handlebar grip.

Stainless Steel pinch bolts included.

The DMR DeathGrip Flangeless is the second collaboration between DMR and Brendog.
We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound.

• NEW colours added to the DMR Brendog DeathGrip range for 2017

• Tapered Core | No need for outer lock ring

• Waffle and Knurl for grip

• Mushroom for comfort

• Available in Thin (29.8) or Thick (31.3)

• Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A.

• 100g per pair

The DMR Defy35 is the perfect mtb stem for your Trail/All mountain build. It features a low stack height, Top-Close clamp design, 35mm reach and 5mm rise. The Defy35 mountain bike stem has a wide clamping area for bar stability and stubby length to pair well with aggressive modern geometry.

35mm diameter clamp and 31.8mm diameter clamp available.

DMR 44 Moto X Pins for DMR Vault pedals.

Overall length 11mm, thread is M4x0.7x6, stud is 5mm using the provided Wrench to secure.

Moto Pin Wrench included.

DMR Sect bike grips are the perfect Park, Street and Dirt jump grip. We took the classic mushroom design and added a thumb patch where previous mushroom grips wear-out first. We also took out the bulge at the end. This is so you can catch the bars right at the end of the DMR Sect grip and still finish the line.

• Wanna use metal barplugs? Cut off the end!

DMR does performance composite.
Presenting the V11 pedal. For those that favour the durability, compliance and affordability of composite pedals, the new benchmark choice from DMR has arrived!

The V11 is moulded with the same proven shape as the multi award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip.

V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe, keeping your foot well and truly planted.

V11 is fully rebuildable with the dedicated V11 service kit, guaranteeing ride after ride with no-nonsense performance.

Developed, tested and refined in conjunction with DMR athlete and designer Olly Wilkins, we can guarantee the V11 is well qualified for a regular dose of heavy punishment.

"Some things don’t need changing. The V11 shares everything we’ve learnt from years producing the best large platform flat. The size, shape and concave from my favourite pedal is now available with a composite body and in a range of colours which don’t wear off when you smash a rock. Perfect for those... who smash rocks... like me!" - Olly Wilkins aka ODUB23