Designed and tested by multiple time world cup DH Champion Aaron Gwin to meet the rigorous demands of world class downhill racing while also improving aero performance and the overall appearance of the bike

Features:

• Curved design allows rear cables to be tucked out of view behind plate
• Low profile design allows full field of vision
• Easy installation / removal using zip-ties (Zip-Ties not included)
• Durable but flexible fibre reinforced polymer construction allows plate to easily flex to fit onto fork stantion tubes where pre configured zip-tie grooves make installation simple

The single crown sibling of our DH38 platform has now been updated to create a more compact, shorter and more lightweight design; optimized for long-travel bikes with up to 180 mm of travel. Designed for both gravity bikes and eMTB with multiple crown offset choices available. The new m.2 version has been re-engineered with a stiff chassis that will keep your line choice on even the most demanding trails. The capable air spring and TTX18 damper will keep your tires planted with the best possible ground contact, swallowing roots and rocks; making your ride more comfortable and controlled.

The RXF38 m.2 boasts a huge range of adjustment; 15 clicks of low-speed compression and low-speed rebound damping and 3 clicks of high-speed compression adjustment, in addition to a climb mode setting. The re-tuned twin-piston, three-chamber air spring system allows for comprehensive air spring tuning from the initial movement right through to the bottom out.

Technical Specifications:

• TTX18 damping system
• Independent cartridge air spring and damper systems
• Air spring adjustable to 160/170/180mm of travel
• Designed for 200mm rotor size, 220 max
• Easy to tune three-chamber air spring system
• 38 mm stanchion diameter
• 44 mm crown offsets
• Floating axle design to minimize tire sizes up to 29 x2.6
• Approved for eMTB use and available with eMTB compatible crowns
• Compatible with maximum tire sizes up to 29x2.6
• Weight: from 2320 grams
• Axle to crown measurement: 583 mm @170 mm stroke
• Rebuildable
• 2 year warranty

Adjustment:

• 3-click high speed compression damping
• 15-click low speed compression damping
• 15-click rebound damping

Purchased parts package:

• RXF38 m.2 including crowns
• Owners manual

104 BCD TRACTION CHAINRINGS

Our DH Stem was developed specifically for the needs of our World Cup DH athletes. It’s a simple design with a 0mm stack that can be adjusted up to 10mm rise with the Spacer Kit. Only available in one length, 45mm, and one speed: fast.

Clamp Diameter: 35mm

Clamp Width: 60mm

Length: 45mm

Weight: 155g

Material: 6000-series Aluminum Alloy

Finish: CNC-machined, black anodized

Stack: 0mm-10mm

Your handlebar’s best friend. The OneUp Stem is designed for everything from trail riding to enduro racing and freeride. Its efficient use of material leads to sleek lines that are structural and aesthetic. Get more from your stem.

A QUICK-CHANGE DIRECT MOUNT CHAINRING SYSTEM

Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler.  

• Cheaper Replacement Cost - Replacement rings are a fraction of the cost of a complete direct mount chainring
• Quick Change - Replace your ring in less than an minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding
• Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain
• 4 Ring Sizes (28, 30, 32, 34T)
• 2 Profiles - both Round and Oval 
• 12 speed ring designed to work with all 10, 11, and both Shimano Hypergilde+ 12 and SRAM Eagle 12 speed chains.
• Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire

Material:  7075-T6 Aluminum

Oval Rings: 

• 12% ovality (32T is equal to a 30T-34T range)
• 115° clocking from crank arm puts the major axis in your power stroke

Compatibility:  All Switch Carriers;  10, 11 and 12 Speed Chains 

Colour: Black

Part of Oxford's Advanced Accessories range, the Oxford Airflow MT Mini is a foldable, space saving, mini track pump with built-in pressure gauge.

Key Features
• Fits Presta & Schrader valves
• Built-in pressure gauge
• Aluminium barrel
• Valve lock
• Fold-out T-handle and foot pad
• 20cm extendable hose
• Carry bracket included
• Max. Inflation 140 PSI

• Small and handy, a 3.65 metre retracting tape measure with both Metric and Imperial measurement readings, all inside a tough composite housing
• Covered by Park Tool's legendary limited lifetime warranty

Peaty's HoldFast Trail Tool Wrap is the ultimate flexible storage solution, designed to flexibly carry your trail essentials on any bike while keeping them clean and giving fast access in trailside emergencies.

Features

• No Rattle, No Slip!
• Flexibly carry your trail essentials on any bike.
• Waterproof material with durable welded seams keeps your tools clean.
• Waterproof zippered stash pocket keeps essentials dry.
• Modular design works with or without an innertube.
• Unique strap attachment secures wrap firmly to your bike.
• Reflective print for extra visibility.
• Fast access to your tools in trailside emergencies.
• Available in Nightrider Black, Slate Grey and Moss Green.

Everyone knows that a straight line is the fastest line! That's why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.

It's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike.

Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colours.

Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.

Key features

• Available in 12x Chris King colours.
• Unique Patent Pending compact straightline design for maximum airflow.
• Simply push down to inflate.
• Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves.
• Each kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeve.

Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.

Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.

Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack.

With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.

Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.

This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.

Features

• Available in 12x Chris King colours.
• Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork.
• With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn't widen the size of the - hole already there.
• Fork made from 316 stainless steel.
• Body made from anodised 6061 aluminium.
• Knurled body and ribbed lid / handle for extra grip.
• Weather sealing o-rings make the tool waterproof when assembled.
• Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs.

LET THEM REIGN, OVER YOUR TERRAIN.

Forged from years of descending. Monarch grips are the holy grail of precision and comfort.

"Race Control" Knurl Texture

This firm classic has been used as a grip texture on tool handles for well over 100 years, and for good reason - a knurl provides an excellent, consistent and aggressive grip. Each ‘knurl' is a diamond shape creating a sharp point. It's this sharp point which provides the grip yet its shallow profile provides a sturdy base, which creates very positive feedback and increased control compared to a mushroom texture. The user of this grip would more likely be a racer and prefer this texture for its increased aggressive feel and precision control.

Thin vs Thick

People come in all shapes and sizes - and so do their hands - so having a one size fits all approach to grip diameter is almost as crazy as offering a one size fits all glove. Our thin grip has 30mm diameter on the inside and 32mm on the outside and thick grip 32mm on the inside, 34mm outside. This not only makes the thick grip an ideal diameter for people with larger hands but also an extra 2mm of impact damping rubber compared to the thin.

Your ideal grip size depends on your riding style, trail conditions. Hand size, and whether you wear gloves or not so it can be as much personal preference as a science when selecting which is right for you. As a general rule people with bigger hands (xl glove size upwards) should opt for a thicker grip however, some aggressive riders (even ones with massive hands) may prefer a thin grip to achieve better bar feel and precise control. Conversely people with smaller hands, who might otherwise be best suited to a thinner grip, may prefer the comfort and fatigue reduction of thick grips over ultimate control.

Tapered Diameter

A tapered grip means that its diameter increases from the inside to the outside of the grip. Our thin grip has 30mm diameter on the inside and 32mm on the outside, and the thick grip has 32mm on the inside, 34mm outside.

This taper helps to create a more natural gripping angle by supporting your palm and reducing pressure on long rides. The taper in the rubber also results in a thinner section of rubber on the inside of the grip (for more bar feel) and a thicker section of rubber on the outside of the grip (for more impact cushioning). This taper also works with the offset core to further increase the thickness of rubber on the top surface, increasing impact cushioning even further!

Comfort Thumb Pad

Your thumb is the only part of your hand that grips the rear side of the grip. This means every rock, drop, root or rail can result in a small impact and rub between your thumb and grip, and can lead to hot spots and blisters on the inside of your thumb (particularly the metacarpal bone / knuckle). Our comfort thumb pad extends further out from the grip diameter to provide more support and cushioning to your thumb, and help to reduce the risk of blisters. Its shape has been finely tuned to find a sweet spot in size and location to cater optimally for small hands, shovel hands and riders who prefer to either position their hands on the inside or outside of the grip while riding.

Cornering forces naturally cause your thumb to shift left and right which causes the straight fins of a mushroom texture to collapse side to side. This can not only create a distracting ‘clicking' feeling under your thumb, but also compromises the level of cushioning and blister protection - enter the zigzag! Like corrugation in a tin roof, adding corners to a mushroom fin creates additional support - the tighter the zigzag, the more solid the thumb pad becomes. Rest assured we've agonised over the angles and measurements of our thumbpad texture to give you the best thumb support and cushioning possible.

Offset Core

Our core has also been offset vertically downwards within the rubber of the grip, creating thicker rubber on the top of the grip than the bottom. This, combined with the tapered rubber body and finger bars cut into the underside give our grip the maximum comfort on the top surface with maximum grip and feel on the underside!

Features

• Texture Options: Knurl for Race Control.
• Thickness Options: Thin (30-32mm) & Thick (32-34mm).
• High Grip Finger Bars
• Uniquely cut inwards for maximum grip & feel.
• Tapered Grip Design: Offset core & tapered design gives more cushion where you need it.
• Zig-Zag Comfort Thumb Pad: Less friction / Less Blisters, more comfort.
• Interchangeable anodized aluminium.
• 130mm grip area with a slim 8mm locking clamp and 3mm allen key bolt.
• Grips available in black, red, mango, turquoise and slate.

- Your initial £100 deposit is to secure your place initially and will be deducted from the total balance of £1,149 - Leaving a balance of £1,049 before 31/03/2026

 - Your £100 booking deposit is non refundable once your booking is confirmed

 - If you wish to cancel your booking then we must be informed in writing, if cancelled before the 31/03/2026 then your £100 deposit is retained by ourselves, If you cancel after the 31/03/2026 and before 01/05/2026 then we will refund 50% of your total balance paid. If you cancel after 01/05/2026 then the total balance paid will not be refunded.

 - If you have not paid your full balance by 31/03/2026 then Pedalz reserves the right to re-sell your place without prior notice.

 - In the unlikely event that we have to cancel the trip due to circumstances outside of our control (excluding Force Majeure) then we will refund 100% of your booking 

 - If your booking cannot happen by Force Majeure then we will not be in breach of contract or liable for any form of compensation. As a gesture of goodwill, We will refund 50% of any payments made if a cancellation is caused by events amounting to Force Majeure. A Force Majeure event is an unforeseeable, unavoidable, external event which includes, but is not limited to, warfare, riots, civil unrest, terrorist activity, government regulations, industrial dispute, weather, epidemics, pandemics, natural or technical disasters, nuclear war or similar events beyond our control.

 - Where we help to arrange a booking for you, for sports equipment, sports lessons, guiding or lift passes, taxis, transfers in vehicles not operated by us, etc. we do so as a complimentary service. We have no control over the provision of the goods and services provided and we cannot accept any liability for the goods and services provided or for the acts or omissions of the companies or any of their employees or other personnel.

 - Pedalz Limited shall not be held liable for any loss or damage of property, delay or costs connected with, or arising out of, adverse weather conditions, including blocked roads, missed flights and airline delays.

 - Pedalz Limited will not be held responsible for any theft or loss of any personal possessions from our vehicles. We will take all reasonable steps to ensure the security of guests’ personal possessions. However, the primary responsibility lies with the client.

 - It is the responsibility of the individual to ensure the safety of all their own personal possessions, documents and equipment.

 - Pedalz Limited cannot accept responsibility for guests missing flights for any reason and no credit or refund will be given if you are unable to take up a component of your holiday as a result

 - You are responsible for any damage caused to the property by yourself, any damages caused will be paid directly to the property by yourself before departure and is not the liability of Pedalz.

 - It is a condition of booking that all clients have personal travel insurance, as Pedalz Limited does not provide travel insurance to its Clients. It is your responsibility to ensure that you have relevant and adequate insurance covering: accident, third party risks, mountain sports, Bike park/lift assisted mountain biking, illness or any other mishap during the entire period of your holiday (including travel to and from resort), costs incurred from damage to property or adjacent properties during your stay caused by you or any member of your party, your employees or your visitors to the property. We also recommend that you take out adequate insurance to cover your personal possessions.

 - We are not "MTB or mountain guides" therefore we cannot guide you, we will provide "group rides" within the package, however participating in these group rides is at your own risk and Pedalz Limited accepts no liability for any injury or damage sustained to yourself or your equipment during the duration of your stay.

 - The rider is fully responsible for their actions whilst attending any group rides. We shall not accept responsibility for the actions of other riders nor the consequences of their actions. The rider is responsible for providing their own insurance protection while attending the group ride. Any accident or injury caused by a riders actions and/or a 3rd party will be the full responsibility of that rider and/or the 3rd party. The rider agrees that they are physically and mentally capable of riding the distance advised by the ride leader. If they decide to change their route then they shall be responsible for any and all consequences of this action. The rider agrees to wear, as a minimum, a suitably designed cycling specific helmet during the whole ride. We reserve the right to refuse participation in the ride if this is not met. The rider confirms that the bicycle they are riding and all of their equipment is of a suitable standard and state of trail worthiness. In particular, mountain bikes should be capable of performing for the longest distance ride available, and over the roughest terrain anticipated. The guided route is shown for advice only and we do not insist that participants use the route shown. Therefore, if the rider chooses to ride a section, it is entirely their own choice. If they choose a different route to avoid obstacles they decide are beyond their capabilities, they do so entirely at their own risk. By taking part in the ride, the rider consents to photography, audio & video recording and its/their release, publication, exhibition, or reproduction to be used for promotional purposes by us and its affiliates and representatives. The rider releases us from any liability connected with the taking, recording, digitising, or publication of interviews, photographs, computer images, video and/or or sound recordings. The rider waives all rights they may have to any claims for payment or royalties in connection with the publication of these materials.

PRODUCT DETAILS