The DMR DeathGrip Flangeless is the second collaboration between DMR and Brendog. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound.
• NEW colours added to the DMR Brendog DeathGrip range for 2017
• Tapered Core | No need for outer lock ring
• Waffle and Knurl for grip
• Mushroom for comfort
• Available in Thin (29.8) or Thick (31.3)
• Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A.
The DMR DeathGrip Race Edition is the second collaboration between DMR and Brendog. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in secret super-soft 'Race Day' compound.
• Available in Black ONLY
• Super Soft 'RACE DAY' Compound | Secret Super-Tacky Formula
Traction grips are developed for extreme conditions and for those that want additional mechanical grip.
Traction grips use an advanced design and need to be set up correctly. With the words 'top' and 'forward' accompanied by some useful arrows, setting up the Traction grips is a cinch. The reason for this positioning is that the grip pattern alternates around its circumference to more effectively interact with each part of your hand.
The traction grip has six unique features;
1. Forward Facing Ramped Finger Ridges;
When pulling back on the handlebars, the majority of the grip and torque is concentrated through the fingers. Forward facing, ramped ridges in the finger area give increased grip when pulling back, yet lay flat in normal riding conditions, for improved comfort.
2. Rearward Facing Angled Palm Grooves;
When braking or steep descending, the majority of the torque and grip is concentrated through the palm. Grooves cut with a rearward facing angle give improved grip in this situation. As the groove is cut into the grip, it gives a comfortable, large surface area for the palm in normal riding conditions.
3. Consistent Pattern;
The grooves and ridges are consistent across the width of the grip, to accommodate riding with your hand in any position on the grip. Be it right in the centre, or with the heal of the hand over the end of the grip, the additional traction is just as effective.
4. Open-Ended Grip Features;
Riding in extreme conditions, crashes are inevitable, which can result in the grip getting packed with mud. We designed the grips to have open-ended features, allowing mud to be purged off the end of the grip. Simply push outwards with your hand.
5. Offset Grip Material;
For comfort, the thickness of grip material under the palm area has been increased to give improved cushioning. Thinner grip material is used under the finger area to keep the overall outside diameter the same.
6. Compound Options;
We offer this grip pattern in four compounds;
Ultra Tacky Soft containing Kevlar® Aramid Resin Soft Medium
Left and right specific with forwards and top side arrow markings. CNC machined 6082 T6 aluminium locking collars. Integrated grip body and locking collars for ultimate durability. Four compounds available. Smooth profile end transition, for maximum comfort. 130mm overall length, 110mm grip section. 5mm outside diameter. Snap-fit end caps. 116g weight (pair).KEVLAR® is a registered trademark of E.I du Pont de Nemours and Company.
A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look!
Human Factor interlocking column design offers the comfort and durability benefits of a finned grip without unwanted float
Anatomically designed, impact resistant bar end tapers to support and protect the little finger Internal cut outs at the palm area reduce impulse shock and vibration adding comfort and reducing fatigue
Three directional ribs at the front of each grip and flare at outboard end add traction in any condition
Extra long body with single lock ring and smooth thumb zone to reduce trigger friction
Asymmetric cushioning design provides firmness where it’s needed, and added softness where comfort is required
Single lock grip, wide profile 33mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern
Our newly redesigned Longneck Lock-On v2.1 Grips bring a welcome facelift to an already iconic grip design. The new design utiliizes our v2.1 Single-Clamp locking system which delivers simple installation and 100% slip-free performance.The outer end of the grips have been designed to be easier on your hands with soft material around the entire end of the grip and are reinforced with harder plastic to prevent grip blowouts.The iconic rib pattern remains unchanged with soft flexible ribs providing excellent vibration dampening and easy to grip comfort - with or without gloves.
Legendary Longneck Rib Pattern
Exceptional Vibration Dampening and Cushion for Longer Rides
SINGLE CLAMP - Version 2.1 Lock-On System
Proprietary ODI Soft Compound Material
Hand Friendly Soft Ends - Reinforced for Added Durability
High-quality and robust grips that'll keep you in full control on the trails.
The Spike Grip from Spank has been specially designed with the off-road thrill-seekers and MTB enthusiasts in mind for the ultimate grip. Boasting a single lock ring design and smooth thumb zone for additional comfort while its reinforced anatomical bar end design supports and protects your little finger. To top it off, this stunning duo features cutouts to improve impulse shock, vibration absorption and comfort so you can get the most out of every ride.
DMR Sect bike grips are the perfect Park, Street and Dirt jump grip. We took the classic mushroom design and added a thumb patch where previous mushroom grips wear-out first. We also took out the bulge at the end. This is so you can catch the bars right at the end of the DMR Sect grip and still finish the line.