Braving the elements? Then grab our new Rain Shield Re-proofer spray. It creates a cutting edge DWR (Durable Water Repellent) layer on all types of technical clothing.

It is a simple to use ‘spray on’ waterproofing treatment, designed to restore factory levels of performance on all waterproof and breathable fabrics. It uses the latest technology to reduce the surface tension of the fabric and provide the very best waterproofing without impacting the breathability of fabrics. It also helps to protect against mud and ground-in stains. And the best bit? It’s safe for the environment, as it’s water-based and doesn't contain PFCs!

Our state-of-the-art ‘spray on’ formula gives unrivalled protection within 24 hours of treatment. After application, water will bead and roll off, so you’re protected to go and get rad in the harshest of conditions.

• PFC free, water-based formula 
• Not harmful for the environment or to you
• Helps to repel wet mud and grime and protects against ground-in stains
• Will not impact breathability of garments
• Extends life and performance of garments
• Easy to apply, supplied in a spray bottle
• Can be used on any technical or waterproof/water repellent fabric including Goretex®, Polartec®, Pertex®, eVent®, softshell clothing, hardshell clothing and down-filled garments
• Will treat 1-2 garments per bottle!

• HOW TO

  1. Shake bottle well before use to activate the formula.
  2. Spray all over a clean, damp garment from 10-15cm away until garment is fully treated. (We would recommend using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). We recommend spraying in a well-ventilated, dry area.
  3. Remove any excess treatment with a clean cloth.
  4. . Allow treatment to cure. Air dry by hanging up and leave to dry overnight before wearing garment in wet conditions again.
  5. The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer. Best applied to a clean, damp garment for optimum results

   
  

  • FREQUENTLY ASKED QUESTIONS

    How many jackets/garments can I treat per bottle?

    Depending on how much you use the 250ml bottle will treat around 2 garments (XL sized jackets) per bottle. 

    How long will the treatment last after application?

    The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing. 

    All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer.

    Can you use Rain Shield on normal clothes?

    The spray will add a DWR coating to the fabric to provide some water resistance, but you cannot make non-waterproof fabric fully waterproof.

Featuring all five Muc-Off brushes in a handy storage bag:

Our Soft Washing Brush sintered bristle compound is designed to clean your frame and components while caring for delicate finishes. It’s all new design features a tough, impact resistant handle that won't slip in extreme conditions, an oversized head for fast cleaning of large areas and rubberised impact zones for maximum protection. 

Our Detailing Brush is ideal for reaching hard-to-shift dirt on sprockets, hubs and other tight areas such as suspension mounts or fork crowns. It’s new design features a tough, impact resistant handle that won't slip in extreme conditions, durable nylon bristles and rubberized impact zones for maximum protection on delicate finishes. 

Our Claw Brush features high quality construction with triple brush heads with tough nylon bristles and an integral scraper for mud de-clogging. It’s ideal for chain, cassette and sprockets, and it’s even 10-speed compatible.

Our Wheel & Component Brush is shaped and contoured specifically to clean rims and spokes with ease. It’s design features a tough, impact resistant handle that won't slip in extreme conditions, durable nylon bristles and rubberised impact zones for maximum protection on delicate finishes.

Our Two Prong Brush is ideal for reaching hard-to-shift dirt on spokes, discs, shocks, cranks, linkages and pedals. It’s design features a tough, impact resistant handle that won't slip in extreme conditions and durable nylon bristles. The twin brush heads can be altered and repositioned to reach the tightest of areas.

• Sintered bristle compounds for safe cleaning
• Rubberised impact zones for maximum protection
• Nylon bristles for durability
• Contains Two Prong, Detailing, Soft Washing, Claw and Wheel & Component brushes

Visor, Lens & Goggle Cleaner quickly and safely removes dirt, dust, grime, snow, sweat and oily residue from all helmets, eye wear and goggles. Its been formulated using de-ionised water as recommended by many helmet manufacturers and it’s safe to use on all lens materials including polycarbonate! Visor, Lens & Goggle Cleaner is also anti-bacterial and uses pH neutral soaps. And you don’t have to worry about the formula either! It’s fully biodegradable and contains no solvents or harmful chemicals.

It's perfect for cleaning motorcycle goggles, cycling glasses and goggles as well as snowboard and ski goggles.

Finally, the solution to protecting your disc brakes during maintenance or transit is here! Our Patented design makes life easy, they are fast and easy to use and help to ensure you won’t have protectant or lube overspray on your discs. The end is nigh for loss of braking power from protectant overspray! Finally!

• Protects disc brake rotors and pads from protectant and lube overspray
• Protects discs during transit
• Quick and easy to use
• Fits all road/mtb rotors
• Simply rinse and use again
• Breathable neoprene
• Protects against corrosion
• Supplied as a pair

Muc-Off’s Wheel & Component Brush is shaped and contoured specifically to clean rims and spokes with ease. Its unique design features an impact resistant, dual density handle and durable nylon bristles.

The Muc-Off Detailing Brush is ideal for reaching hard-to-shift dirt on hubs and other tight areas such as suspension mounts or fork crowns. Its unique design features a tough, impact resistant handle that won’t slip in extreme conditions, durable nylon bristles and rubberised impact zones for maximum protection on delicate finishes.