Effortlessly subtle and minimal design to keep your seat post secure and add the perfect last splash of colour to your build. No edge left unsmoothed, and no detail overlooked, even the split in the back has been machined wide enough so you don’t need to detach your dropper cable which makes installation a breeze. A stainless-steel bolt gives reliable clamping power and ensures no rust even in the grimmest conditions.

• Stainless Steel Hardware
• 6061-T6 Aluminium
• Weight: 22g

Fits:

• 34.9mm - Predominantly 30.9mm Seat Posts
• 36.4mm - Predominantly 31.6mm Seat Posts
• 38.6mm - Predominantly Specialized Full Suspension
• 39.7mm - Predominantly Trek Full Suspension

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors.

Simplify things with an 8mm fitting and add a splash of your favourite anodised colour. Never worry about turning the garage upside down at midnight to find that little ‘thingy’ to pre tension your cranks ever again.

Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended  torque 0.7 to 1.5Nm.

See below for compatibility.

Suits;  XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor

Saint FC-M800 / FC-M820 / FC-M825

XTR  FC-M9000 / FC-M985

XT  FC-M8100 / FC-M8000 / FC-M785 / FC-M782 / FC-M780 / FC-M771 / FC-M770 / FC-M761 / FC-M760

SLX M7100 / FC-MT610 /FC-M7000 / FC-M675 / FC-M672 / FC-M670 / FC-M677 / FC-M665 / FC-M660

Deore M6100 / FC-MT510 / FC-MT511/512 / FC-M612 / FC-M610 / FC-M615 / FC-M617 / FC-M591 / FC-M590

ZEE FC-M645 / FC-M640

LX FC-M583 / FC-M582

EBike M8000 / M8050

Trekking FC-T781 / FC-T780 / FC-T551 / FC-T8000

FC-M532

FC-M542

FC-M545

FC-M552

FC-M590

FC-M596

FC-M591

FC-M610

FC-M617

FC-M660

FC-M665

FC-M770

FC-M771

FC-M780

FC-M785

FC-M6000

FC-M6100

FC-M7000

FC-M7100

FC-M8000

FC-E8000 (EBike)

FC-M9000

FC-M622 / FC-M625 / FC-M627 / FC-M552 / FC-M545 / FC-M543 / FC-M542 / FC-M533 / FC-M532 / FC-M4060 / FC-M4050

FC-MT500-3 / FC-MT700-2

Comfortable, Fox-branded slip-ons

You should always have something to slip on your feet when you get out of the water, house, or whatever. The Fox Head Slides feature an embossed Fox Head and will keep your feet comfortable, day in and day out.

• Kids specific fit (4-5 years)
• Compression-molded cuff for a secure fit
• Padded single-layer for comfort and bar feel
• Touch screen compatible
• TPR knuckle coverage

High-cushion socks

Our 8" Defend Socks are trail-ready socks built for demanding rides and whatever the day can throw at them. These high-cushion socks provide compression arch support and with trail-specific cushioning at the heel, toe, and shin, all-day comfort is assured. The flat stitch toe construction stops chafing and irritation while you ride, and with the rib knit upper, they'll stay up as long as you do.

Treat your feet

With their simple go-to aesthetic and iconic Fox look, our 8" Ranger Socks get the job done comfortably and with little fuss. The mesh zones of these socks provide exceptional breathability and ventilation without breaking your budget. When the trail gets rough, the cushioned heel and toe bring comfort, while the rib-knit upper will ensure these socks stay exactly at the height you pull them up to.

Stay hydrated with the purist water bottle

Keep yourself hydrated as you ride with the Purist Water Bottle. The easy-to-open MoFlo cap is effortless to use on the fly, and leak-proof when closed. Best of all, nothing sticks inside this bottle so it stays clean while your water keeps its pure taste.

The perfect hat to top off your daily look

There can be no denying it: the Dispute Snapback Hat is pure, iconic Fox style. With its familiar Fox graphic, easy adjustability, plus long-lasting construction and materials, this lid is an instant must-have for Fox fans.

The perfect hat to top off your daily look

Give in to the sense of discovering the unknown with the Exploration Flexfit Hat. Constructed using quality, hard-wearing materials, and featuring stretch-fit technology to make it über-comfortable, it's the perfect hat to top off your daily look.

Bring the shade with you

With its iconic logo and laconic style, the Base Over Sun Hat says it all without saying a word. Wide-brimmed to give you the shade you deserve, a classic shape to keep you on the down low, and featuring a simple, cinch-able neck cord to keep that hat where it oughta stay in breezy conditions, this hat is well on its way to becoming essential on bright, sunshiny days.

A lightweight, hard working hat with moisture-wicking properties

With its iconic logo and lightweight stretch fabrication, the Non Stop Tech Flexfit Hat raises the bar on what technical headwear can do. Focused on fit and function, it comes with moisture-wicking properties to keep your head cool and dry as you go about your day, while the stretch-fit technology ensures that perfect fit, every time.

• An iconic logo and patented stretch-fit technology make our headwear a long-lasting staple
• Focused on fit and function
• Lightweight stretch fabrication
• Moisture-wicking properties
• Woven patch

PRODUCT DETAILS

The troy lee designs chill merino wool socks, with their long, 22cm necks, come to mid-calf length to protect you from brush and undergrowth as you ride. Designed to be tough, their 50% merino wool construction ensures that they are soft and odour resistant too.

Ribbed for elasticity and italian made, these socks are dark enough to hide the dirt. They're adorned with a strong pattern and unmistakable troy lee designs branding to speed you on your way.

• Single layer padded palm with mapped laser hole perforation
• Neoprene cuff for added comfort and increased fit
• Conductive index and thumb for touchscreen compatability
• TPR Index finger for protection
• Silicone printed Fingertips for lever grip

Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.

Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.

Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack.

With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.

Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.

This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.

Features

• Available in 12x Chris King colours.
• Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork.
• With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn't widen the size of the - hole already there.
• Fork made from 316 stainless steel.
• Body made from anodised 6061 aluminium.
• Knurled body and ribbed lid / handle for extra grip.
• Weather sealing o-rings make the tool waterproof when assembled.
• Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs.

Everyone knows that a straight line is the fastest line! That's why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.

It's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike.

Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colours.

Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.

Key features

• Available in 12x Chris King colours.
• Unique Patent Pending compact straightline design for maximum airflow.
• Simply push down to inflate.
• Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves.
• Each kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeve.

Everyone knows that a straight line is the fastest line! That's why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.

It's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike.

Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colours.

Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.

Key features

• Available in 12x Chris King colours.
• Unique Patent Pending compact straightline design for maximum airflow.
• Simply push down to inflate.
• Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves.
• Each kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeve.

• Shell Fabric 1: 100% Cotton, COTTON TWILL, 400 gsm.
• With its classic shape, durable twill fabric, visor and matching snap closure, the Classic 5 Panel Snapback is cool and offers an authentic look, a classic with a ton of potential.

•400 Lumen

•Light Source: XPG Super bright white LED

•Functions: Steady (100% & 35%) - Flash - Off

•Battery: 1200mAh Lithium Ion

•Run Time: 3 - 5 hours

•Remote control switch

•Multi-function electric horn

•USB rechargeable

•Waterproof: IPX4

Best-in-class, race-spec goggles with expansive viewport

The Airspace Flora Goggles line borrows features from our pro-level Vue Goggles for improved ventilation, peripheral vision, and comfort. These performance goggles have a larger viewport and improved frame angles to give you a wider field of view, while the outrigger system bumps up the comfort to create a secure fit.

• Best-in-class viewport for improved peripheral vision
• Ability to install both standard and hard lenses
• Outrigger strap design provides a superior fit
• 45 MM, non-slip silicone strap improves grip on helmet

• Presta Valve
• CNC Machined from 6061 T6 aluminum
• Knurled body for added grip
• Sold as a pair
• Upgrade your plastic caps with some style!
• Weight: So light they will not register on our scale

DEITY GRIP CLAMPS

• Add some more colour to your DEITY Grips
• Replacement for your original black DEITY Grip Clamp
• Grip Clamps include a pair of clamps to outfit one pair of DEITY Grips

Colours - Blue, Bronze, Orange, Platinum, Purple, Red, Silver

While the Pit Viper Originals were designed to be shot, sat on, and run over while maintaining sun and wind-bucking ability, consumers demanded an even more durable, premium-er Pit Viper. The future is here, it's The 2000s. Built with a softer nose piece, improved optics, and sturdier E-Spot™ and Turbo Adjustment™ these bad boys will demand respect and authority with long-lasting comfort and versatility.

The 2000's, everything you ever wanted.

These Pit Vipers are Z87+ Safety Rated to protect your eyeballs from hazardous conditions at your jobsite, on the field, or in the bedroom.

The 2000s come in only one size. They are an average sized fit for medium heads. 

A WOMEN'S SPECIFIC LIGHTWEIGHT 8-LITER BIKE HYDRATION BACKPACK.

A sturdy staple, the Women's Session 8L is a lightweight, compact hydration pack with dedicated storage for trail essentials. An updated recycled poly outer is rugged and sustainable, and the women's specific fit of this lightweight pack ensures minimal shifting and evenly distributed weight, while the breathable air flow back panel and shoulder straps keep you cool on the trail by minimizing hot spots. The Women's Session stores two liters of vertical hydration, features a dedicated fleece-lined pocket for sunglasses, internal organizer pockets, and an integrated rescue whistle on the sternum strap.